NooElec Ham It Up v1.3 – NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks

NooElec Inc. Ham It Up - If you have questions please our support team any time! Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Proudly made in the USA and Canada with high-quality components! Both items can be found in our store. Free bonus: we had space left on the PCB, so rather than waste it we have added a noise source circuit at no additional cost.

We have even populated most of the components for you. Full operating instructions, specifications and features list are available on our website, nooelec. Com important note:ham it up enclosures designed for versions prior to v1. 3 will not work 100% with Ham It Up v1. 3. If you do not currently have an SDR we have plenty of low-cost solutions available in our store.

NooElec Ham It Up v1.3 - NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - Ham/amateur radio enthusiasts, rejoice! our MF/HF converter for software defined radio will allow you to listen to MF and HF through your existing software defined radio SDR. Full 1-year warranty. We have the sma connector required to complete this bonus noise source circuit available for a small additional fee.

Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Open-hardware design! Full documentation available: http://opendous.

More information about NooElec Inc. Ham It Up

Extruded Aluminum Enclosure Kit, Blue, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

NooElec Inc. 100672 - Enclosures for v1. 2 and earlier are still available in our webstore for a limited time. These high-quality aluminum enclosures or aluminium, if you're weird like that are custom-made for all current production versions of the Ham It Up upconverter. Note:only compatible with Ham It Up v1. 3 and higher. Two color options are available - metallic blue with laser-etched labeling, and silver with color silkscreen labeling.

High-quality custom aluminum enclosure for Ham It Up v1. 3. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. The color-matched side panels are included as well. The enclosures include the appropriate standoffs and screws to mount the upconverter.

Extruded Aluminum Enclosure Kit, Blue, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios - A better option than unshielded cases, most certainly, and fairly priced as well. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! .

More information about NooElec Inc. 100672


Similar products:


DHT Electronics 2PCS RF coaxial coax cable assembly SMA male to MCX male right angle 6''

DHT LLC RG084 - Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Rf coaxial coax cable assembly sma male to MCX male right angle 6 inches High-quality custom aluminum enclosure for Ham It Up v1. 3. Cable type: coaxial Quality Low Loss RG316. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector.

Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Connector material:Pure brass with Great connectivity. Not Alloy. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined.

DHT Electronics 2PCS RF coaxial coax cable assembly SMA male to MCX male right angle 6'' - Ham it up upconverter sold separately. Package include:2 x SMA to MCX cables.

More information about DHT LLC RG084


Similar products:


DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches

DHT LLC RG032 - Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Package content : 1 x SMA Cable. Connector material:Pure Copper with Great connectivity.

Not Alloy. High-quality custom aluminum enclosure for Ham It Up v1. 3. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Package include:2 x SMA to MCX cables. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector.

DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches - Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Impedance :50 ohm. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Cable type: coaxial Quality Low Loss RG316.

More information about DHT LLC RG032


Similar products:


Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - NooElec Balun One Nine

NooElec Inc. Balun One Nine - Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use.

Excellent specifications & low insertion loss. Only 39. 2mm x 13. 0mm and 5g! At 39. 2mm x 13. 0mm in total size including connectors! this balun was designed to be light in weight and light on your wallet. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB!

Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - NooElec Balun One Nine - An excellent way to attach a long wire antenna to the Ham It Up, this 1:9 balun has an SMA output port and high-quality spring-type terminal block input for your coax. Designed for hf applications, but specifications are accurate to frequencies up to 90MHz+. High-quality custom aluminum enclosure for Ham It Up v1.

3. Dht electronics brand is a registered trademark of DHT LLC.

More information about NooElec Inc. Balun One Nine


Similar products:


NooElec NESDR Smart Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

NooElec Inc. NESDR SMArt - Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.

Package content : 1 x SMA Cable. Run multiple nesdr smart side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi. Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Sdr frequency capability approximately 25mhz-1700mhz. Connector material:Pure Copper with Great connectivity.

NooElec NESDR Smart Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio. - Not Alloy. Cable type: coaxial Quality Low Loss RG316. Connector material:Pure brass with Great connectivity. Not Alloy. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.

More information about NooElec Inc. NESDR SMArt


Similar products:


HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier

HiLetgo® 4330353723 - Proudly built by nooelec in the USA and Canada! Full 2-year product warranty. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Package content : 1 x SMA Cable. Metal case helps to protect PCB from stray EMI, improving sensitivity.

Includes all required hardware to mount your PCB! High gain low Noise LNA Amplifier. 2. Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 01 uf, working to 01 mhz. Run multiple nesdr smart side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.

HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier - Cable type: coaxial Quality Low Loss RG316. 3. When the power supply voltage changes in 5-8 v, to control the gain of the amplifier, it can be used as a variable gain amplifier, using DA control power supply voltage, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, automatic gain control 4.

When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector.

More information about HiLetgo® 4330353723


Similar products:


NooElec HackRF One Software Defined Radio SDR, ANT500 & SMA Antenna Adapter Bundle

NooElec Inc & Great Scott Gadgets 100715 - Operating frequency01-2000mhz. Run multiple nesdr smart side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi. A wide variety of improvements on other designs, custom heatsink, including ultra-low phase noise 05ppm tcxo, rf-suitable voltage regulator, 2 silicone pads and SMA female connector.

Designed from the ground up to reduce usb port occlusion. Hackrf one is test equipment for RF systems. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.

NooElec HackRF One Software Defined Radio SDR, ANT500 & SMA Antenna Adapter Bundle - High-quality custom aluminum enclosure for Ham It Up v1. 3. 1 mhz to 6 ghz operating frequency ● half-duplex transceiver ● up to 20 million samples per second ● 8-bit quadrature samples 8-bit I and 8-bit Q ● compatible with GNU Radio, SDR#, and more ● software-configurable RX and TX gain and baseband filter ● software-controlled antenna port power 50 mA at 3.

3 v ● sma female antenna connector ● sma female clock input and output for synchronization ● convenient buttons for programming ● internal pin headers for expansion ● Hi-Speed USB 2. 0 ● usb-powered ● open source hardware HackRF One has an injection molded plastic enclosure and ships with a micro USB cable.

Proudly built by nooelec in the USA and Canada! Full 2-year product warranty. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon Product ID B009LQT3G6.

More information about NooElec Inc & Great Scott Gadgets 100715


Similar products:


DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper

DZS Elec - The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas. Installation support and assistance available directly from NooElec. Connector material:Pure Copper with Great connectivity. Not Alloy. Cable type: coaxial Quality Low Loss RG316.

An 8pc sma adapter set and carrying case is also available on Amazon Product ID B073JT98RR. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Connector: all-copper SMA Male to SMA Male adapter. Connecting line: 15 cm RG316 military quality cable.

DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper - High temperature resistance, acid resistance, corrosion resistance, high frequency low loss and low impedance. Wide applicability, easy to use, to ensure high quality communication. Package include: 2pcs rg316 SMA Male to SMA Male adapter with cable. Impedance :50 ohm. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.

More information about DZS Elec


Similar products:


Extruded Aluminum Enclosure Kit, Silver, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

NooElec Inc. - Enclosures for v1. 2 and earlier are still available in our webstore for a limited time. Maximum power output+10dBm 10mW. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Package content : 1 x SMA Cable. Run multiple nesdr smart side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.

Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! A better option than unshielded cases, most certainly, and fairly priced as well. Two color options are available - metallic blue with laser-etched labeling, and silver with color silkscreen labeling.

Extruded Aluminum Enclosure Kit, Silver, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios - Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB!01-2000mhz rf wide Band Amplifier. The enclosures include the appropriate standoffs and screws to mount the upconverter. High-quality custom aluminum enclosure for Ham It Up v1. 3.

More information about NooElec Inc.


Similar products:


DHT Electronics Handheld Antenna Cable SMA male to UHF SO-239 Female Connectors 6''

DHT LLC RG080 - Connector material:Pure Copper with Great connectivity. Not Alloy. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Package content : 1 x SMA Cable. Run multiple nesdr smart side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.

The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas. Installation support and assistance available directly from NooElec. Proudly built by nooelec in the USA and Canada! Full 2-year product warranty. Premium rtl-sdr bundle includes newly designed nesdr smart in beautiful brushed aluminum enclosure, re-designed antenna base with 2m 6.

DHT Electronics Handheld Antenna Cable SMA male to UHF SO-239 Female Connectors 6'' - 5' rg-58 feed cable, and 3 antenna masts. 01-2000mhz rf wide Band Amplifier. Impedance :50 ohm. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Connector: all-copper SMA Male to SMA Male adapter.

More information about DHT LLC RG080


Similar products: