NooElec 1090ES & UAT – Radios and High Gain Antennas. Dual-Band NESDR Nano 2 ADS-B 978MHz & 1090MHz Bundle, Starter Edition, for Stratux, Avare, Foreflight & FlightAware

Nooelec Inc. NESDR Nano 2 Bundle, Starter Edition - Each sdr is lab-calibrated and serialized for easy Stratux software installation. They are medium-sized, and tuned for 1090mhz aDS-B and 978MHz UAT reception, high-gain antennas meant for portable and ground applications, respectively. Please consider our nesdr nano 3 dual-band bundle amazon sku: b076gwf6ff.

2 nesdr nano 2 sdRs are included. Full 1-year warranty through NooElec on all bundle components. Each comes with a calibration certificate with the calibration value & serial number, along with a pair of adhesive labels which you can apply to the location of your choosing for easy identification. This dual-band sdr bundle contains everything you need for a full DIY ADS-B installation.

NooElec 1090ES & UAT - Radios and High Gain Antennas. Dual-Band NESDR Nano 2 ADS-B 978MHz & 1090MHz Bundle, Starter Edition, for Stratux, Avare, Foreflight & FlightAware - They have a frequency capability of approximately 25MHz-1700MHz. This bundle includes additional antennas and adapters, and also utilizes our Nano 3 SDR with aluminum enclosures for a higher-performing & safer ADS-B experience. These sdrs contain an r820t2 tuner along with an RTL2832U USB interface/demodulator.

Also includes a pair of high-gain ads-b antennas, tuned to 1090MHz and 978MHz, respectively. There is a full 1-year parts & labor warranty on all bundle components. The nesdr nano 2 are very small in size, which makes them perfect for portable and embedded applications. Includes 2 nesdr nano 2 sdrs.

More information about Nooelec Inc. NESDR Nano 2 Bundle, Starter Edition

Stratux AHRS Sensors and Fan Controller/Raspberry Pi MPU9250+BMP280

Stratux NA - Mpu-9250, bmp280, and fan speed controller. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit.

More information about Stratux NA


Similar products:


Stratux Case with Fan, White ABS

Stratux 4328429874 - Stratux case. Place stratux inside and secure six screws. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS.

Fits stratux AHRS board. Injection molded white ABS with flame retardant. Does not include raspberry Pi, GPS, SDRs, or battery. Simplified assembly and all tools required included.

More information about Stratux 4328429874


Similar products:


Stratux Vk-162 Remote Mount USB GPS

Stratux Vk-162 - Manufacturer specs: tracking sensitivity: -160dbm acquisition sensitivity: -146dBm Cold start time: 32s average Warm start time: 32s average Hot start time: 1s average Recapture Time: 01s average Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit.

Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant. Plug and play with and supported by Stratux project. Individually tested with Stratux before shipping.

Stratux Vk-162 Remote Mount USB GPS - 7 ft. Updated: u-blox 7 chipset. Ipx6 waterproof / dust-tight. Cord for remote mounting magnetic base. Waas capable.

More information about Stratux Vk-162


Similar products:


EasyAcc Power Bank 6000mAh Portable Charger with Built-in Micro USB Cable Ultra Slim External Battery Pack for Smartphones

EasyAcc 4334959610 - No more extra cables needed. Convenient. Updated: u-blox 7 chipset. Ipx6 waterproof / dust-tight. Built-in micro usb cable: compatible with almost smart devices with micro port. 2 outputs can serve your and your friend's phones at the same time in times of emergency. Easyacc make it easy easyacc powerbank - make it easy to keep running all the time Why choosing EasyAcc PB6000CB ? Smart Technology: Save your time for fast charging With the Smart Technology.

Our power bank always provides your device the perfect amount of power up to 2. 4a while automatically detects the type of device, achieving the charging performance while using an original power adapter. 6000mah capacity can offer a whole day power juice with 1-2 charges. Dual output: built in cable & external smart usb output, free from extra cables.

EasyAcc Power Bank 6000mAh Portable Charger with Built-in Micro USB Cable Ultra Slim External Battery Pack for Smartphones - Security protection design:with short-circuit and over-current protection, our battery pack will automatic shutdown, if a short circuit or overload output occurred while charging. Convenient built-in Micro USB Charging Cable:Say goodbye to cable knots. 6000mah high capacity: Perfect for travel. Cord for remote mounting magnetic base.

Waas capable.

More information about EasyAcc 4334959610


Similar products:


Stratux Strap Kit with Rubber Bumpers

Crew Dog Electronics - Includes 4 rubber bumper spacers. Compact: after installing your Stratux will be a compact all in one unit holding the battery tightly to the Stratux unit even during turbulence. Easy installation: just place the 4 bumpers on the bottom of your Stratux case inside the screw holes for spacing and you're ready to go!

No more extra cables needed. Convenient. Provide an alternative flashlight to camera flash. Comprehensive safety protection: effectively prevents your devices from overcharge, RoHS, overcurrent and short circuits as well as conform to CE, and FCC. Non-slip: 12 inch rubberized lipo strap is the perfect sized strap to keep your battery in place on Stratux window mount.

Stratux Strap Kit with Rubber Bumpers - Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant.

More information about Crew Dog Electronics


Similar products:


Stratux AHRS Upgrade Kit - Includes AHRS Chip, Fan Controller, Pre-Programmed 2GB MicroSD Card v1.5b1, SD Memory Card Adapter

Crew Dog Electronics 4332810060 - Provide an alternative flashlight to camera flash. Comprehensive safety protection: effectively prevents your devices from overcharge, overcurrent and short circuits as well as conform to CE, RoHS, and FCC. Non-slip: 12 inch rubberized lipo strap is the perfect sized strap to keep your battery in place on Stratux window mount.

Upgrade your stratux with AHRS without the hassle of reflashing your MicroSD card. Invensense mpu-9250, bosch bmp280, sandisk 2gB MicroSD card, and SD card adapter for future updates. Complete upgrade kit: everything you need is included to turn your old Stratux build into an AHRS model. No more extra cables needed.

Stratux AHRS Upgrade Kit - Includes AHRS Chip, Fan Controller, Pre-Programmed 2GB MicroSD Card v1.5b1, SD Memory Card Adapter - Convenient. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board.

More information about Crew Dog Electronics 4332810060


Similar products:


Summitlink V2 Black Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes

SummitLink 4330257809 - Includes 4 rubber bumper spacers. Compact: after installing your Stratux will be a compact all in one unit holding the battery tightly to the Stratux unit even during turbulence. Easy installation: just place the 4 bumpers on the bottom of your Stratux case inside the screw holes for spacing and you're ready to go!

No tools required to assemble. Smart external usb port automatically detects the type of device, compatibale with almost usb devices, achieving the charging performance while using an original power adapter. Just in case flashlight: Backup for unexpected power failure or emergency. Raspberry Pi Not Included.

Summitlink V2 Black Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes - Includes cooling fan and the case and mounting accessories. Cord for remote mounting magnetic base. Waas capable. Multiple antenna holes allow more flexible antenna postion and better portability. It includes all ports for power cable, external GPS antenna etc. Suction cup Link: https://www. Amazon. Com/dp/b06xsh5d4k/ref=olp_product_details?_encoding=UTF8&me= Fits AHRS Module.

Multiple antenna holes allow more flexible antenna postion and better portability.

More information about SummitLink 4330257809


Similar products:


LoveRPi Performance Heatsink Set for Raspberry Pi 3 Model B+ 2 Heatsinks

LoveRPi LYSB018BGRDVS-ELECTRNCS - Cord for remote mounting magnetic base. Waas capable. Easy assembly: no soldering needed. Includes cooling fan and the case and mounting accessories. Snap on board, connect fan, and replace your MicroSD card. Updated software: includes the newest stratux version 1. 5b1 supporting ahrs with your favorite EFB software including ForeFlight, FlyQ, iFly, WingX, and more.

Quality parts: all parts sourced directly from stratux project. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. No more throttling: reduce chip hot-spots and increase thermal dissipation surface area by 10x. For raspberry pi 3 model b, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.

LoveRPi Performance Heatsink Set for Raspberry Pi 3 Model B+ 2 Heatsinks - Must have for raspberry pi 3: at full load, bcm2837 soc will reach 100°c. Updated: u-blox 7 chipset. Ipx6 waterproof / dust-tight. Built-in micro usb cable: compatible with almost smart devices with micro port. Mandatory for applications in high temperature, sealed, or overclocked applications. Long lasting exact fit: cpu and lan chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B.

More information about LoveRPi LYSB018BGRDVS-ELECTRNCS


Similar products:


Summitlink V2 White Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes

SummitLink 4330257867 - Cord for remote mounting magnetic base. Waas capable. Multiple antenna holes allow more flexible antenna postion and better portability. Dual fan configuration for better cooling of both Raspberry Pi and ADS-B receivers. Double-sided 3m thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.

Quick and simple installation: peel and stick in the orientation with the most airflow. Also compatible with Gopro mounting system. It includes all ports for power cable, external GPS antenna etc. Simple and easy for AHRS compatible cases! Included spacers and velcro strap are for mounting power bank on the case.

Summitlink V2 White Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes - Includes cooling fan and the case and mounting accessories. No tools required to assemble. No more extra cables needed. Convenient. No tools required to assemble. Suction cup Link: https://www. Amazon. Com/dp/b06xsh5d4k/ref=olp_product_details?_encoding=UTF8&me=.

More information about SummitLink 4330257867


Similar products:


Summitlink V2 Clear Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes

SummitLink 4336300977 - Also compatible with Gopro mounting system. It includes all ports for power cable, external GPS antenna etc. Provide an alternative flashlight to camera flash. Comprehensive safety protection: effectively prevents your devices from overcharge, RoHS, overcurrent and short circuits as well as conform to CE, and FCC.

Non-slip: 12 inch rubberized lipo strap is the perfect sized strap to keep your battery in place on Stratux window mount. Raspberry Pi Not Included. The case has a standard tripod/suction cup mounting nuts for convenient mounting. Includes cooling fan and the case and mounting accessories. Fits ahrs module. Dual fan configuration for better cooling of both Raspberry Pi and ADS-B receivers.

Summitlink V2 Clear Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes - The case has a standard tripod/suction cup mounting nuts for convenient mounting. Includes cooling fan and the case and mounting accessories. Dual fan configuration for better cooling of both Raspberry Pi and ADS-B receivers. Double-sided 3m thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.

Quick and simple installation: peel and stick in the orientation with the most airflow. It includes all ports for power cable, external GPS antenna etc.

More information about SummitLink 4336300977


Similar products: